Skidmore-Wilhelm Bolt Tension Calibrators & Parts
Vision Target Inc. sources Skidmore-Wilhelm bolt tension calibrators and their plates, bushings and spacer kits from U.S. supply channels and ships them to project sites worldwide. Send us the model and bolt sizes you need, and we will quote availability, lead time and export documents.
Verifying bolt pretension on structural steel
A Skidmore-Wilhelm calibrator measures the actual tension in a high-strength bolt as it is tightened. Steel erectors and inspectors use it for pre-installation verification: testing sample bolts, nuts and washers from each lot to confirm the installation method reaches the required pretension. The RCSC Specification calls for a bolt-tension calibration device for this work, and Skidmore-Wilhelm is the device most often specified.
What we supply
- Bolt tension calibrators, including the HS-100 (HS100), up to 176,000 lbf / 800 kN
- Long-bolt plates and bushings for each bolt diameter
- Short-bolt plates for use with DTI washers, and matching short-bolt bushings
- Spacer kits (5, 10, 20, 40 and 80 mm sets for metric sizes)
- Metric M16 to M36 and imperial sizes such as 1-1/4 in
What to include in your RFQ
- Calibrator model, or the maximum bolt diameter and grade you test
- Bolt diameters and length ranges (long and short bolts)
- Whether you use DTI washers
- Quantity of each plate, bushing and spacer kit
- Delivery country, and documents needed (for example calibration certificate, certificate of origin)
Skidmore-Wilhelm part numbers we have supplied
A recent export order covered an HS-100 calibrator with a full set of accessories for every bolt size below. Send these part numbers, or your own list, with your RFQ.
| Bolt size | Plate (long bolt) | Bushing (long bolt) | Short-bolt plate (DTI) / bushing | Spacer kit |
|---|---|---|---|---|
| M16 | HS8516 | HS8716-27 | — | SPACER1600 |
| M20 | HS8520 | HS8720-34 | HS81520-DTI / HS81720-34 | SPACER2000 |
| M22 | HS8522 | HS8722-36 | HS81522-DTI / HS81722-36 | SPACER2200 |
| M24 | HS8524 | HS8724-41 | HS81524-DTI / HS81724-41 | SPACER2400 |
| M27 | HS8527 | HS8727-46 | HS81527-DTI / HS81727-46 | SPACER2700 |
| M30 | HS8530 | HS8730-50 | HS81530-DTI / HS81730-50 | SPACER3000 |
| M33 | HS8533 | HS8733-55 | HS81533-DTI / HS81733-55 | SPACER3300 |
| M36 | HS8536 | HS8736-60 | HS81536-DTI / HS81736-60 | SPACER3600 |
| 1-1/4 in | HS520 | HS620 | — | SPACER114 |
Calibrator: HS100 (model HS-100, LBF and kN dial). A complete calibrator kit with accessories shipped as an HS-100 in a hard carrying case plus boxed accessories, on a pallet of roughly 1,000 to 1,200 lb.
One U.S. contact from RFQ to export shipment
We check your part numbers against the bolt sizes you list, source from U.S. channels, consolidate the order in Texas and prepare export packing and documents. You deal with one contact by email or WhatsApp throughout.
Vision Target Inc. is an independent sourcing company. We are not an authorized distributor or representative of Skidmore-Wilhelm unless stated on this page. Skidmore-Wilhelm and all other trademarks are the property of their respective owners and are used only to identify the products we source.